Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is impedence matching?

Status
Not open for further replies.
S

sanddune008

Newbie level 6
Joined
Aug 28, 2008
Messages
12
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,360
what is impedence

Hi all,

What is meant by impedence matching?

Is there a way to model CAT5e cable using resistors and capacitors?

As i what to simulate the cable length of any mtrs using this modeled hardware \
by just changing the resistors.

Thanks in advance
 

actually when load transfers from high resistance circuit to less resistance circuit it is reflective back into that circuit

and when this load transfers from low resistance circuit to high resistance circuit it may not reach the destination node as power will be absorbed by the high resistance circuit

in order to accurately transfer the power the impedence of both ciruit should be matched so tha power flows smoothly between the circuits
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top