Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How could I excite a mcrostrip line in HFSS V11?

Status
Not open for further replies.
E

eng.dreamer

Junior Member level 1
Joined
Oct 13, 2008
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,368
hffs how to excite the microstrip line

Hey all;
I am working on a patch antenna design and I want to use a microstrip line to excite the patch, but I don't know who to model this in HFSS V11 . .
anybody could help? I'll be thankfull
 

Hey there,

So here is how I would define a microstrip port.

First draw a rectangle from your microstrip line to your ground plane (as shown in picture.

Then click on that rectangle and say "define excitation" -> "lumped port" (as shown in attached picture)

Then define the correct main e-field line (shown in picture as well but draw from center of microstrip directly down to ground)

I have attached an example HFFS file that has a microstrip line and two lumped element ports.

Hope this helps,
B
 
Thanx b4bb4ge :)
It seems that u r expert in HFSS (at least compared to me!), would u tell me how the 'Eignmode' solution type exactly works?

If it is possible, can I be an HFSS expert within a week?!
 

HI
how could i excite two wire (cylindre) lines (signal and groud) and three wire lines (differential mode; two signals+ ground) in HFSS? I wan to plot the characteeristic impedance and the S-parameter.
I'll be thankfull...
A
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top