Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

import image to allegro

Status
Not open for further replies.

damian_s

Member level 1
Member level 1
Joined
Aug 18, 2005
Messages
34
Helped
0
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Indonesia
Activity points
1,545
pads allegro import error

Dear all,

I've trying to import an image (in DXF and PLT format) to Allegro 16.0, but nothing appear. First I convert a bmp format image into DXF format using Img2CAD software but nothing appear. Then I try "Raster to Allegro" to convert bmp file to PLT file and still nothing appear when I import the file in Allegro.

Does anybody having the same experiences and willing to share the solution?

best regards,
damian_s
 

import logo into allegro

Are you able to open DXF file with any DXF reader such as Autocad or other tools?
Do the layer that you mapping DXF is on?
Also try to open plt file with any text editor and see which layer is mapped to?

Never had problem with this but I am still on 15.7.

Regards,
M
 

how to import jpeg file to allegro board file

Dear damian_s,


How do you import the DXF to Allegro,
your question is not clear,

r u getting any error message while importing?


ohterwise it is giveing successfully imported after that u are not getting imported one.

tell me the problem briefly, then i will give the solution


Thanks,
R. Balasubamaniaraju
 

how to import image to allegro?

Please find the procedure to import .BMP/JPEG/.JPE/.JFIF/.GIF/.TIF/.TIFF/.PNG/.DIB file to Allegro or PADS layout:

Uses:
1.When the customer provided the logo or drawing in bitmap(or Above any format) format.Without creating manually ,can be imported directly to the layout.
2.When the customer not given logo and asked us to down load it from the web. Down load the logo and convert it into any above mentioned format and import the same into the layout.

Procedure to import the .BMP/.JPEG//.JPE/.JFIF/.GIF/.TIF/.TIFF/.PNG/.DIB format file to PADS layout:
1.Save the above file in monochrome .bmp format.
2.Copy the attached script file BMP2ASC and .bmp file in the same directory.
3.Run the command BMP2ASC bitmap.bmp ascii.asc 2 26 0 0 at DOS command prompt.
Where BMP2ASC is the script file name.
bitmap.bmp is the bit map file name
ascii.asc is the converted output in .asc format.
This command will scan the data and convert it to horizontal lines 2 mils wide. These lines will be placed on layer 26 (silk-screen top), and the lower left-hand corner of the image will be at 0,0.(w.r.t.,PADS Layout).
4. Open up a new PADs file, and import the ASC file. Be sure to set the color and the minimum display


Procedure to import the .BMP/.JPEG//.JPE/.JFIF/.GIF/.TIF/.TIFF/.PNG/.DIB format file to ALLEGRO layout:
1.Save the above file in monochrome .bmp format.
2.Copy the attached script file BMP2ASC and .bmp file in the same directory.
3.Run the command BMP2ASC bitmap.bmp ascii.asc 2 26 0 0 at DOS command prompt.
Where BMP2ASC is the script file name.
bitmap.bmp is the bit map file name
ascii.asc is the converted output in .asc format.
4.Import the .asc file to allegro board file. OR
5.Import it to PADS layout.Export DXF of the same.
6. Open up a Allegro file, and import the DXF file.

****************************************************************

Note : While importing DXF file directly pls check if the units are set properly as per DXF unit.
 
Dear all,
I am unable to convert bmp to asc format.
if i run the command, i am getting following error.

Unable to open input file <bitmap.bmp>.,


My file path is like ...
d:\logo\


Files:

bitmap.bmp
bmp2asc.exe

my command which i typed in command window,
d:\logo\BMP2ASC bitmap.bmp ascii.asc 2 26 0 0

Please advise me if i am wrong.

Thanks,

Best Regards,
Prabu
 

Hi coolman,

i tried to open the customer logo in allegro but i couldn't do that .

can you please guide me how to import the .bmp file in allegro ...

Thanks and Regards
Geekay
 

I am also getting the same error message:
Unable to open input file <bitmap.bmp>

I have been trying for days to get our PCB designer to incorporate a logo in the silkscreen of a PCB and they keep complaining that all the files we give them (BMP, DXF, etc. don't work). It's so frustrating. You'd think printing a logo from a standard bit-map file would be a regular feature of a PCB software product.
 

hello can u plz send me the step by step procedure, how to import company logos or images to allegro
 

Hello sloth,
Thanks for the replay but can u please tell me how to download this and confirm it is working for allegro.



Thanking you

---------- Post added at 13:11 ---------- Previous post was at 13:05 ----------

if u have that ,Please share that.
 

Actually I haven't used the program yet, I was having the same problem as you but with PADS. But I read this should work for both. But can't really promise anything. Still waiting for them to confirm my download.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top