Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A question of ultresim using.

Status
Not open for further replies.
B

bitcat

Junior Member level 3
Joined
Dec 7, 2004
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
193
how to tell ultrasim use different simulation mode for each block.
ADE i used. thanks a lot...
 

first of all, make sure you have selected Tools -> Mixed Signal Options

Then Select Hierarchy Editor -> Edit Configuration

Then on the Hierarchy Editor select the View - > Properties

A new column, sim_mode will appear.

Here u can choose the accuracy for the block you are running, from s , a , ms , da down to df .

s is the most accurate (but slowest) mode while df is fastest but for digital circuits only

VOILA... you've got your mixed mode sim in your default accuracy option
 

    B

    bitcat

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top