asueee0
Advanced Member level 4
ami 0.6u c5n
The NCSU 1.5 is much easier to intall than the previous one , however, after installing it (i simply followed the instruction in the install example file) , I found some differences.
in release 1.4, When I attached technology library to a desgin, the following options will show up:
AMI 1.6U ABN (2P,NPN)
AMI 0.6U C5N (3M,2P,high-res))
HP 0.6u AMOS14TB (3M,sblock,thin-ox cap)
TSMC 0.40u CMOS035 (4M,2P,HV FET)
TSMC 0.40u CMOS035 (4M sblock, HV FET)
TSMC 0.30u CMOS025 (5M, HV FET)
TSMC 0.24u CMOS025/DEEP (5M, HV FET)
TSMC 0.20u CMOS018 (6M, HV FET, sblock)
TAMC 0.18u CMOS018/DEEP((6M, HV FET, sblock)
In realeas 5, when repeating the same thing, I have the following options:
NCSU_TechLib_ami06
NCSU_TechLib_ami16
NCSU_TechLib_hp06
NCSU_TechLib_tsmc02
NCSU_TechLib_tsmc02d
NCSU_TechLib_tsmc03
NCSU_TechLib_tsmc03d
NCSU_TechLib_tsmc04_4M2P
I am not quite sure the correspondence of the technology librarys between release 1.4 and 1.5, it seems that realease 1.4 is clearer when we select a library, it it possible to bring up the interface in 1.5 as in 1.4 when attaching technology library?
The NCSU 1.5 is much easier to intall than the previous one , however, after installing it (i simply followed the instruction in the install example file) , I found some differences.
in release 1.4, When I attached technology library to a desgin, the following options will show up:
AMI 1.6U ABN (2P,NPN)
AMI 0.6U C5N (3M,2P,high-res))
HP 0.6u AMOS14TB (3M,sblock,thin-ox cap)
TSMC 0.40u CMOS035 (4M,2P,HV FET)
TSMC 0.40u CMOS035 (4M sblock, HV FET)
TSMC 0.30u CMOS025 (5M, HV FET)
TSMC 0.24u CMOS025/DEEP (5M, HV FET)
TSMC 0.20u CMOS018 (6M, HV FET, sblock)
TAMC 0.18u CMOS018/DEEP((6M, HV FET, sblock)
In realeas 5, when repeating the same thing, I have the following options:
NCSU_TechLib_ami06
NCSU_TechLib_ami16
NCSU_TechLib_hp06
NCSU_TechLib_tsmc02
NCSU_TechLib_tsmc02d
NCSU_TechLib_tsmc03
NCSU_TechLib_tsmc03d
NCSU_TechLib_tsmc04_4M2P
I am not quite sure the correspondence of the technology librarys between release 1.4 and 1.5, it seems that realease 1.4 is clearer when we select a library, it it possible to bring up the interface in 1.5 as in 1.4 when attaching technology library?