Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to determine the delay of decimation and envelop filter in AGC?

Status
Not open for further replies.
mhamini

mhamini

Member level 1
Joined
Aug 23, 2005
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Iran-Tehran
Activity points
1,690
My AGC works on sigma delta modulator.
The decimation filter and the envelop detector has some delay.It will cause something wrong on AGC.
How to determine the delay of the filter and how to prevent that?
 

Re: AGC

>>How to determine the delay of the filter

Check phase response of the filter in Matlab, if it is almost linear, you can find time delay as
phi(rad)/(2*pi*f(rad/sec))

Or you can check time group delay :) In Matlab too :) Be careful - time group delay is defined as D(phi)/D(2*pi*f),
where D(.) is derivative
 

    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top