Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Altera Nios II Processor and MAC-net core

Status
Not open for further replies.
L

layaghi

Member level 3
Joined
Sep 3, 2005
Messages
60
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,786
HI to all
do you have experience with Altera Nios II Processor and MAC-net core to connect an embedded application requiring high-throughput network connectivity to the network?
Please help me :
1-What is the price of cores, is there any open core for this purpose?
2- I already downloaded the reference design from Altera site. Now I don't know is it sufficient to build a working project or It needs other components.
Please give me your guidelines and recommends.
Thanks
 

Nios II Processor

Hello layaghi,

The MAC core (10/100) from Opencores (www.opencores.org) is very famous. I don’t have experiences with it but there are a lot of people who are using the core within a Nios II system. Beside EDAboard there is another forum which I think is more helpful for questions regarding Nios II: www.niosforum.com


Regards,
cube007
 

    L

    layaghi

    Points: 2
    Helpful Answer Positive Rating
Re: Nios II Processor

the open core on the net is ok ,I have used it to connect LAN 91C111!
 

Re: Nios II Processor

Hi xuruquan
How could I get the open core?
Please give me the direct link.
Thanks
 

Nios II Processor

What development platform are using?

Are you planning to use sipoc builder? Can yuo please be more specific about application?>
 

Nios II Processor

www.opencores.org for the 10/100 Core. For NIOS II, you can't get it for free. You can only get a time-limited version.
 

Re: Nios II Processor

The open core can been tested using LAN91C111?
The LAN91C111 have MAC+PHY,can I only use the PHY?


Thank you !
 

Nios II Processor

I don't believe so - NIOS I And II have a core to communicate with the LAN91C. This isn't a MAC, since like yo usaid, the LAN91C is a MAC+PHY combo. This is more of an avalon bus peripheral so you can talk to it through NIOS.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top