Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[AVR] how to interface long range RFID with GSM+GPS module using ATMEGA164 microcontroller?

Status
Not open for further replies.
N

Narendra1190

Member level 2
Joined
Jan 23, 2014
Messages
44
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
1,666
HII!!

I am working on project in which i require the person identification from 1-2 meter and that id need to be sent to web-server through gprs(GSM module)with gps location.I am having good knowledge of Atmel AVR(ATMEGA32) series MCU.But i am facing several issues..Please help me.

1) i couldnt found any RFID reader with 1-2 meter scanning range of Passive RFID tag.(Any other method can i use for identification?)

2)To interface RFID+GPS+GSM module i need more than 2 UART MCU.so i found ATMEGA161. Or any other suggestion will be appriciated.

Thank you.
 

1) Sadly I think you'll never find a RFID system with a 1-2 meter range, the lack of powersource in the tag make them work in small distances only... (I think I have seen one that works at 30cm tops) better if you put your sensor only near the person (via a pole or something) and the rest of your circuit on the wall communicating with the sensor [wiegand? rs485? rs232 is ok up to 10m].

2) yep, it's better if you make each module work with it's own hardware USART... I think you can use an arduino MEGA board that has 4 uart ports (minus 1 used for programming). Remember, even if it's called arduino, at the end of the day it's an Atmega2560 with a stk bootloader...
 
Sadly I think you'll never find a RFID system with a 1-2 meter range
Click to expand...
ISO15693 13.56 MHz RFID has a specified range of 1 to 1.5 m. Long range UHF RFID readers achieve up to 6m (EPC, ISO18000-6).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top