Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST MW problem in circularwaveguide simulation

Status
Not open for further replies.
Mitesh Viradiya

Mitesh Viradiya

Newbie level 4
Joined
Dec 19, 2014
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Gujrat,India
Activity points
46
hello friend

while i am simulate circular waveguide in frequency domain solver and time domain solver its show me an memory error and meshing error and its stop simulation automatically
my circular waveguide parameter are as below
inside radius 36mm and outer radius 38mm PEC martial and cor is filed with an air for frequency range 100GHz to 200GHz

while i am able to simulate a rectangular waveguide with a core of air and surface of PEC martial

help me to solve this problem

thank you
 

Seems like that is an electrically large structure~20 wavelengths. Try using I-solver (recommended for electrically large structures) instead. Not sure if that would solve your problem, but worth a shot. Also, a structure this large would require a huge amount of mesh cells. You might need to get a higher RAM for your PC. If possible, do not forget to make use of the symmetry planes for your structure, this will reduce the total mesh by half for one plane of symmetry.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top