Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Voltage Step Up For Mosfet Gate

Status
Not open for further replies.
M

MD68

Newbie level 6
Joined
Nov 20, 2013
Messages
11
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
88
I know there are step-up boards available, but I am wondering if there's a quick and dirty method of stepping up a voltage from say 12V to 24V? The reason I ask is because I have an application that currently uses a P-Channel power mosfet to supply current to a load @ 12V. The reason it has to be p-channel is because the load has to be connected to the ground rail (common earth). It seems to me that I could use cheaper and more powerful N-Channel mosfets with the load on the ground rail if I drove the gate at 24V but seeing as I only have a 12V supply that would mean using one of those step-up boards. Is there not some trick I can employ to get 24V from 12V, I don't need much current at all for a mosfet gate.
 

Google for "boost converter".
 
  • Like
Reactions: MD68

    M

    MD68

    Points: 2
    Helpful Answer Positive Rating
A simple "high-side" driver will also work.

John
 

A simple "high-side" driver will also work.
Click to expand...
The OP doesn't say anything about the application (e.g. switch mode converter or static load switching), in so far you can't know if a "simple high-side driver" (bootstrap driver) does work.

A general solution that isn't restricted to a specific input voltage and duty cycle range would use a charge pump to provide a supply voltage relative to the source node, that is also able to swing above the input voltage.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top