Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Feedback circuit analysis

Status
Not open for further replies.
G

gggould

Member level 3
Joined
Apr 10, 2004
Messages
63
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
532
Hi all,

I have been confused by how to identify series / shunt / mixing / sampling in real circuit.
It is clear to me in testbook two port network example, but hard to figure out when it comes to real circuit.
Can someone explains to me a little bit?

Also whats Rin/Rout/Av in the following ckt?
ckt.jpg

Thanks a lot~~
 

Can someone give me a hint, like what is Rin and Rout?
Here is the pic:
h**p://imgur.com/esM1ven
 

Loop gain is 1+gm3*R. Input impedance is (1/gm2) /(1+gm3*R). Output impedance is R/(1+gm3*R). The circuit is a current controlled voltage source. Voltage is sensed at the output and current is fedback at the input. You can also find the impedances by usual methods of KVL/KCL. But while finding output impedance do not ground the input, as the input is a current source.
 
Thanks for the comment~~~ But why is the current fedback at input not voltage?? The feedback portion looks like a source follower isn't it?
 

If you consider the feedback as a voltage signal (i.e output of the source follower), then the input must also be a voltage. To implement the feedback, the input voltage and the feedback voltage must be added. Two voltages cannot be added by connecting them together (as in this circuit), instead the currents add. That is why if you drive this circuit by an ideal voltage source, feedback will not play any role and output will simply be -gm3*R*vin.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top