Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

coding for wireless data transmission to selective receiver

Status
Not open for further replies.
A

ankitmiddha619

Newbie level 3
Joined
Apr 12, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
i want to ask for the coding of my project wireless data transmission using 8051 mc with ps2 keyboard to selective receiver (i.e. one transmitter and two receiver) , i want to know if anybody know coding for this project

- - - Updated - - -

without the use of zigbee( only RF comm.)
 

Sure its possible.

Please see the holteck ics.ht12d and ht12e there is a preamble in the data transmission,at receiver this preamble is matched.

Swapping the preamble at tx and to set of rx with different preamble is what you require.

Coding is possible,first let me know you are ok with this idea.
 
yeah i know this idea, i am working with this idea...
but i am having problem with coding....
i don't know the coding for this prog...
 

Ok...do you have a usable pin output of minimum 5 ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top