Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

regarding datapath and macro placement

Status
Not open for further replies.
S

sathyanarayana raoh

Junior Member level 3
Joined
Aug 26, 2011
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,451
hi,
answer to these questions plz


1. how to know the datapath and clock path from timing reports...
2. any script for macro placement . can i group macro according to their clock
3.in sdf file i dint see which clock is given to which macro...how can i know
 

Answer to 1) Usually in timing report, there is data arrival time and data required time. The path shown with respect to data arrival time is data path and the path shown with respect to data required time is clock path. Then slack is calculated as difference between arrival and required time. However different tools output their timing report differently and you may even customize some tools timing report output.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top