Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Devkit8000 not booting from NAND nor SD card

Status
Not open for further replies.
A

Akshay Deshmukh

Newbie level 4
Joined
Jan 20, 2012
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
when i start Devkit, LCD only displays white sreen......nothing happens further...
can anybody give me a pointer to the the actual error or pointer..
plz helpme out...
thank you!!!
 

i had same problem, what i did is reboot the system, i mean from beginning upload the kernel and file system for defined addresses.
i also searched over net and came with no results. i figured out that nand couldnt read the address of the kernel when loading.
 
mashhur said:
i had same problem, what i did is reboot the system, i mean from beginning upload the kernel and file system for defined addresses.
i also searched over net and came with no results. i figured out that nand couldnt read the address of the kernel when loading.
Click to expand...

Thanx for your quick reply!!
i didnt get how you uploaded the kernel and file system for defined addresses??
 

Akshay Deshmukh said:
Thanx for your quick reply!!
i didnt get how you uploaded the kernel and file system for defined addresses??
Click to expand...

i have been using samsung's S5PC100 cpu and it has data sheet, user guides. there is written how to load kernel and file system in NAND memory.
so, i did as shown in constructions, then kernel run out.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top