Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
wimax help
Hi Abdulrahman,
Thank you, I know the structure I need to know how to implement this block diagram in Matlab, if you could help in this matter.
thanks
shwan
It is clear that the MMSE is one of the Equalization technique, and the equation is as follow:
Y(n)=X(n).[H*(n)/|H(n)|.^2+(Es/N0)^-1]
Where Y(n) is the received signal
X(n) is the transmitted signal
H(n) is the Faded signal (channel Impulse resp[onse)
Es is a symbol energy for QPSK
N0 is the...
matlab mrc
Hi awan'
To simulate MRC in Matlab should be as follow:
R(t)=y.*conj(fade);
where y is the received signal
fade is the signal passed through multipath channel and AWGN.
If you not understand, please send me your all program in order to correct it.
I hope this will help
shwan
MIMO-OFDM
Hi totohaha,
Could you please send me the OFDM syntax, because I am working on it, and I have difficulties to design an OFDM system with multipath fading.
Very thanks in advance.
sh.
Re: OFDM
Hi,
For Complete OFDM program in matlab go to the following links, and you will find several matlab files, which are for OFDM, if you don't understand, ask me
**broken link removed**
Good luck
shwan
how to make a pole zero plot in matlab
Hi Hyper 145,
Very thanks for your explenation was interesting, so therefore, I would like to help me to write a program for multipath channel using OFDM with QPSK or QAM modulation technique.
Thanks
shwan
Hi,
I think its good to use help in Matlab window, there is a command called CHAN = RAYLEIGHCHAN(TS, FD)and also you can add the paths number.
Or rewrite your program to me with opposit explenation in order to understand your syntaxes, and command to be able to insert the Rayleigh fading to...
maximum ratio combiner
Hi,
Could you please help me how to use the Maximum Ratio combination in Multipath Rayleigh fading channel, using Matlab comands, and have a look for the program bellow you will see the error that I have, and could you tell me the problem, and how to solve it.
clear all...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.