Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by runblade

  1. runblade

    ARM Cortex M3 compilers in linux?

    Look at this: Linux demo (STM32) - Developer - SW / FW
  2. runblade

    Op Amp Neededwith following configuration

    Re: Op Amp Needed National LMC6484 **broken link removed**
  3. runblade

    Data acquisition from a microcontroller

    It may help you. **broken link removed**
  4. runblade

    [req] Any information about ABB Tecnomasio S.p.A

    abb-tecnomasio A start point: http://www.abb.it/cawp/itabb701/5821509281ECB925412567F60045DAAE.aspx
  5. runblade

    Pic16f886 start design trouble

    This is the first time i get involved with microchip. I create a small project where I lit on some led. Why if I run the target using ICD2 debug the led lit on but if I disconnect the debug cable and power on the target the led remain off?
  6. runblade

    Question about crystal and reference voltage in Mega8 with ADC

    mega8 programmer Using external Vref at 1000mV why not?? Or amplify signal by 2,56 factor??
  7. runblade

    need help for Freescale controller programming

    In a freescale sub-directory there are some sample code... I think is a good start point... also; https://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=DEMO9S08QG8&parentCode=S08QG&fpsp=1&nodeId=01624684491437 the :DEMO9S08QG8APP is a codewarror project that could be easy ported for...
  8. runblade

    need help for Freescale controller programming

    freescale c programming When you start code warrior ask you if you want do a new project (CW >5.0 Vers.). Put a project name->Select the hc(s)08 version and the debug interface -> Go ahead from adding files in your project (I don't think you have any files...to include) -> Select Processor...
  9. runblade

    Need AVR complier for Atmel series

    avr studio at90usb646 @muoinhohn Have you work with avrstudio 4.XX or later?
  10. runblade

    Switching NMOSFET & PMOSFET

    www.ortodoxism.ro/datasheets/SGSThomsonMicroelectronics/mXyyuzu.pdf I hope the A.N. could be usefull for you.
  11. runblade

    Connecting ADC input to microcontroller and ground

    Re: ADC ground Why not use 5v6 zener instead 10V? Voltage value more than 5V is not happy tollerate by ATmega32... (aftrer partitor...). This is useful for other microcontroller line protection
  12. runblade

    Which is good....Energizer (or) Duracell.......?

    Please stop this non-sense questions. Is better duracell plus or duracell ultra M3 or duracell procell than energizer ultimate or energizer display or energizer industrial???
  13. runblade

    need ATMEGA16 C code example

    atmega16 example google is your friend! do a search on it. Also visit www.avrfreaks.net
  14. runblade

    Help to Design Hardware !!!!

    Take a look to Analog devices microcontroller ADuC Series. Two mainstream devices: 8051 core or ARM core. The main issue is precision on A/D converter...
  15. runblade

    RF/Encryption/Microcontrolers->Help to develop this proje

    The MC13212 System in Package (SiP) integrates the MC9S08GT MCU with the MC1320x transceiver into a single 9x9mm LGA package. The MC13212 provides 32 K Flash memory and 2 K of RAM, providing an ideal platform for applications that require a star network using the Freescale SMAC or IEEE...

Part and Inventory Search

Back
Top