Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: humidity sensor
thank you GSM Man, my english is so basic :cry: and didn't read the datasheet carefully
I finally got this results with (160pf to 210pf).
Re: humidity sensor
Hi friends,
i have to do a small project to measure the humidity. using the HS1101 which have this characteristics at 1% ===>C=177pf
99%====>C=183pf
my question is how to transform the variation of the capacitance to variation of tension...
Hi
i design this DBR filter and now i need to do the EM simulation with momentum, so can any one help me for this??
i upload here the response i obtain but as you can see the results dont correspond from those of the circuits simulations.
Re: filter optimization!
ok,i finnaly got it!!!
if someone is interested by the results i post them below!
my error in the design i posted above is that i don't take in acount from the effective permittivity!
filter optimization!
i need help to optimize this dbr filter!
i sythetize my DBR filter with ADS with ideal line and i post here the sheme!
after that
I transcribed the lresults by using line calc and then on new window ADS I simulated my circuit with the acquired length, and as you can see...
ok i tried what you suggested to me and here i upload the results , so what do you think guys about this results in compare with the first ones!
S(1,1) at the upper freq=-13.54 db
S(4,1) at the upper freq=-13.00 db
are this results good?
because i read somewhere that we must always have S(1,1)...
i design this branchline coupler as you see in this pdf but i'd like to optimize it!!
so can someone help me?
the characteristics of my coupler:
the upper freq=2.17ghz
the low freq=1.92ghz
freq design f0=2.045ghz
C(coupling coeff)=3db
Hi everybody
need help to find documentation about DBR filters?
if someone had this
“ Design Techniques for Dual-passband Filters, ” IEEE Transactions on Microwave
Techniques, Vol. 53, No. 11, November 2005."
or this:
IEEE Transactions on Microwave Theory and Techniques, Vol. 53, No. 9...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.