Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by narccizzo

  1. narccizzo

    short time fourier transform

    Sure, just deposit $100 USD to my bank account 54123:98706.
  2. narccizzo

    hi frnds., i am interested in learnins real time system.

    Hello, Try FreeRTOS-A Free professional grade RTOS supporting 27 architectures, including ARM7, ARM9, Cortex-M3, RX600, MSP430, MSP430X, MicroBlaze, AVR, x86, PIC32, PIC24, dsPIC, H8S, HCS12 and 8051 They have demo applications for a whole bunch of different micros and it's free, I just...
  3. narccizzo

    DESIGNING A PULSE OXIMETER TSL230R BASED

    Hi everyone, long time since last time I visit the forum. I noticed that geocities site is dead, so I decided to share the project here. Regards
  4. narccizzo

    Who have made a ICD3 Clone ?

    icd 3 schematic I think this is not that easy, but anyway this is the inside and the log when MPLAB tries to communicate:, after it communicates keeps sending-receiving some info. Tell me what do you think? Regards. 000074: Get Descriptor Request (DOWN), 12.03.2009 18:07:34.442 +17.775...
  5. narccizzo

    What type of modulation is used in the aircraft transponders

    And how hard is to implement a simple modulator and demodulator for bench testing purposes.
  6. narccizzo

    DESIGNING A PULSE OXIMETER TSL230R BASED

    pulse oximeter edaboard I recommend to get the R and IR leds in any hospital supplies as the entire set, because they have to be specific wavelengths.
  7. narccizzo

    NOKIA 1100B LCD PIN CONFIGURATION

    nokia 10 pin display Hi, First its very important that you make sure that your LCD is still working, because some reason I blown mine.
  8. narccizzo

    test question about circuitry with diodes

    diode is ideal both
  9. narccizzo

    test question about circuitrywith diodes

    diode is ideal 2 Both diodes are on (short circuit), current in R = 1mA.
  10. narccizzo

    sensitive pcb design and simulation...

    This is a good one: High-speed Digital Design (Johnson & Graham).
  11. narccizzo

    Mobile cellphone camera datasheets

    Ok, after 2 years I am in the same situation, but now I'm going to try to hack the interface of this small thing, if someone is interested any help is welcome.
  12. narccizzo

    What is the difference between a character and a graphicsLCD

    Plz help!!!!! yes you can (both).
  13. narccizzo

    crystal damage using pic16f628A with 20Mhz crystal.

    crystal damage Due to the high impedance of the xtal I think that you need a really high voltage to cause some damage.
  14. narccizzo

    testing stepper motor problem- it doesn't stop

    Re: stepper motor problem Hi the watchdog timer is configured on and is reseting the program, modify the lines: WAITB BTFSS INTCON,2 GOTO WAITB CLRWDT ; <------ kick the watch dog DECFSZ COUNT,1 GOTO WAITA LL NOP CLRWDT ; <------ kick the watch dog...
  15. narccizzo

    AM29F010 flash memory programming problem

    AM29F010 If the memory works and reads blank, the problem is the programmer for sure.
See more

Part and Inventory Search

Back
Top