Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Graphic LCD controller
Hi all, i'm still looking for some kind of IP to implement a graphical controller into the FPGA. I'd like to make it compatible with standard IC like Epson, or any others supported by graphical libraries.
ANy idea, or reference i could use?
Cheers
LCD controller
Hi all,
i'd like to integrate a graphical LCD controller into an FPGA( already integrating the processor, and some peripherals), in order to driver either TFT or Monochrome LCD panel. The video RAM could be external.
The idea is to have that integrated LCD controller to behave...
Hi All,
Does anybody kniw if a chart comparing all various Embedded OS exists, and if so, where to get it from.
I would like to make sure, i'am chossing the right ne for my various projects.
Narc
LCD controller
Hi all,
I would like to design a graphical LCD controller, to interface to a TFT screen. Anybody whith experience on this, or any suggestion would be welcome.
I would also like to make it software compatible with one of the standards one 'epson type', so that graphical library...
RFID like design
Hi all,
if anybody could help , I must design a RFID like base station, working @125kHz.
The main difference is that the mobile tag has its own power source, and two antennas, one for reception, the other for emission.
The emitting part is fairly easy, but i am having trouble...
ac zero-crossing detector
Hi all, i'd like to control some heating resistor (2*5kW per phase), so, up to 6 elements, and control their power.
I was thinking about using per phase:
-zero crossing detector to trigger the PWM output of a µ.
-use the PWM output to drive a TRIAC.
Any reference of...
QoS interface
Hi all,
i'd like to know how to get from a WiFi access point, the list of client connected, and their received power on order to perform a kind of position tracking.
I know that Aps also exchange beacon messages, but how tograbb them
Helpplz, since thois is for my final year...
Hi all,
i'd like to interface to either an ethernet PCMCIA card (standard or wireless), using a standard µcontroller (like M16C, or that kind), using an EPLD to do all the interfacing job.
Anybody having already done this,or any information on how to realise PCMCIA interface would help.
For...
Hi all,
I would like to get the locations of mobile users, on a wifi deployed network, using the beacon messages exchanged between the Access Points. How to grab those message. Are the windows socket will allow this. Are the drivers allow this???
Any welp will be appreciated.
Narc_Otic
IAR MAke APP
Hi All,
i've downloaded the evalation version of the IAR MakeApp application for MC16 targets, but demo mode is not powerfull enough for my test purposes.
Anybody would have an extended demo mode, before purchasing it if evaluation went all right
Thanks
Narc Otic
Help on antenna design
Hi all,
I'd like to simulate the radiated field from a rectangular loop antenna to make sure I obtain an isotropic volume of 30cm^3 somewhere around it.
Any specialist around.
I am thinking to use superNec to do this.
Any experience around??
Help plzzz
Narc_Otic
Hi all,
I'd like to simulate the radiated field from a rectangular loop antenna to make sure I obtain an isotropic volume of 30cm^3 somewhere around it.
Any specialist around.
I am thinking to use superNec to do this.
Any experience around??
Help plzzz
Narc_Otic
Antenna design help
Hi all,
any help on antenna design plz.
I'd like to design a 50 Ohm matched rectangular loop antenna, which will generate an isotropic volume of 30cm3^in its centre. The emited frequency will be 2.313MHz.
Any help will be considered.
Any tools too
Many Thanks
Narc
Help on antenna design
Hi all,
any help on antenna design plz.
I'd like to design a 50 Ohm matched loop antenna, which will generate a isotropic volume of 30cm3^in its centre. The emited frequency will be 2.313MHz.
Any help will be considered.
Any tools too
Many Thanks
Narc
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.