Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: plot waveform of digital signals error, at mixed modelli
Hi,
I had the same problem with LDV5.0...
It is LDV version bug.
After updating to LDV5.1 the problem disappeared.
Good luck.
Sam.
Re: I can not save the states of Cadence IC5033 in Fedore Co
I've met the same problem a half year ago.
The reason seems to be the next:
Fedora and RedHat-8 have a different data storage style.
Specifically that problem you can resolve by entering to .cdsinit the next line...
Hi masai_mara,
I don't know, why you have problems.
I've installed many cadence tools on one PC without problems.
You just need install them in a different directory. For example:
IC5033 to /tools/cadence/IC5033
LDV51 to /tools/cadence/LDV51
SOC33 to /tools/cadence/SOC33
Of course, it takes some...
Hi Sutapanaki,
I think you have a problem with network.
During starting icfb checks all hosts in your network and disks on your computer.
If you have network config or disk mounting problems icfb will try to explore its
for a long time.
Good luck!
cadence cdsplotinit postscript
I have done the next:
1. Put in my .cdsplotinit file the information
My_printer|PostScript1:\
:manufacturer=Adobe: \
:type=postscript1: \
:maximumPages#1: \
:resolution#600: \
:paperSize="A4" 4960 7015: \
:paperSize="A3" 7015...
Re: LDV 5.1
ISR is not enough.
You need Base_LDV51_lnx86_1of2.tar and Base_LDV51_lnx86_2of2.tar.
Untar all packages.
Start to install from ISR directory. Later it will ask you Base* location.
Good luck.
I heard about installation tar problems on linux many times.
I think you are using first Assura release for linux.
Simple solution:
1. Install this package on solaris.
2. Move your installation folder to linux.
Good luck.
Hi willyboy19.
Of course, you can install cadence under any user. But for security issue I suggest to create special account for all cadence products, for example "cdsmgr". Installation under root is dangerous - nobody knows what is inside of your package. Just don't forget to allow this user to...
I have similar question.
Does anybody now how to pass Instance parameter to functional view during SpectreVerilog mixed mode simulation? For example invertor delay time for different types of a structure. It is not convenient to use different cells for different invertors. During analog...
Put these two files to one directory for example ~/temp/
After it
cd ~/temp
tar xvf Base_LDV41_lnx86_1of1.tar
tar xvf ISR200304081120_LDV41_lnx86_1of1.tar
cd ISR.../CDROM1
./setup.sh
and folow the instructions. After several minutes program will ask you base product path. Write...
how to install cadence on linux
You can create link:
ln -s /usr/bin/mozilla /usr/bin/netscape
After it add line to your .cshrc file:
setenv MOZILLA_HOME /usr/bin/netscape
But I suggest to download and install netscape version 4.8...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
