Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hiii Sir,
im trying my best to program a glcd after successfully doing it wid character lcd....ma basic doubt is dat "lets say i want to display a road path on my glcd,so den i need to set pixels ryt??so how are these pixels accessed??in which array??how to modeify dem??i really want the...
hiiii
1)it myt not be showing any respoinse on the hyperterminal because u hv turned off few settings in hyperterminal...line echo linefeed carriage return...tick on dem..
2)may be the sim holder is loose because of which there is no network and thus the blue led is not turned ON
hiiii...i am working wid lpc2148 interrupt register when i gt confused wid few data..
1) If a bit in VICIntSelect is 0 den its Vectored IRQ ryt?
VICIntSelect=~(1<<15) selects EINT1
VICVectCntl0=(1<<5)|15; here bit 5 is set to 0 which mean enable non vectored default IRQ....
y is dat...
hiiii
i am finding it difficult to interface glcd 128x64 with lpc2148....escpecially i am not aware about the value of pull up registers to be used along the pins of glcd with lpc2148..
cud sumone help me wid the interfacg??does anyone have the diagram to interface??plssss
im facing difficulties while interfacing glcd128x64 wid lpc2148...cud sumone post here the schematic diagram of this circuit?what shud be the value of pull up resistor dat i need to use??
Hiiii,
Im working on sim908 and wanted to know if 9V supply with 1Amp is okay???
i earlier had used adapter wid ratings of 12V bt the modem used to heat up very quickly....so is 9v okay???Also i checked wid 5V ....the leds wer not glowing much....
pls help me or else i myt burn up dis modem tooo
This is more of an algo that i want to implement...i need help
1)shud i be concerned about the reply i get from the gsm modem?(like OK,ERROR...)
2)how shud i den implement it...?
#include <stdio.h>
extern unsigned char cmgf[]="AT+CMGF=1";
extern unsigned char...
[Moved]Lpc2368 and glcd interfacing tutorials
Hiii
im a beginner to glcd...im working wid 320x240 glcd and lpc2368....i searched a lot many threads for the qame subject bt i didnt get proper libraries for glcd..cud sumone help me wid it...
also is der any links that helps me wid learning the...
Hiii..im a beginner to lcd programming...im doing a project which needs a graphic lcd ...could sumone suggest me resources and links to learn the basics of graphic lcd programming and its interfacing with ARM processors..lpc2368 especially...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.