Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
My bank of T105's 6 of them in series parallel supplies my house. I took two off and am now operating on 4 instead of 6, reason being I cannot charge at 70 amps + (should be 80) to adequately charge all 6 and figured my 50 amp charger would be more efficient on the 4 bank than the 6 bank and so...
I have a bank of T-105's at approx. 705amh just by slip my voltage meter touch the top of my somewhat dirty batteries and provided a reading quite to my surprise. My question is this: being that the meter obtained a reading am I loosing voltage through the tops of the bank because they are not...
wow bradtherad time flys I've been away from here for few weeks and thank you for your question my charger is a Sears diehard commercial charger and it does have a sensor that if heated up will cause the charger to charge for 3 mins. then rest for 1 min. or maybe the reverse either way I've been...
Thanks guys, my inverter is modified sine wave and surge rated 2k it is a zantxax. I do have a large pure sine I'm getting ready to install I just want to up my wire sizing first. And I'l get my meter out and check that good idea Roaburn
Thanks again
I currently have my 675amh battery bank on 4awg wire with the charger supplied by it's factory 6awg I charge from 15 amp to 50 amp monitoring closely, my question is this. I am up grading to a prowatt 2000 inverter pure sine and it specs for a 4/0 wire for supply, I'm thinking I should not only...
So here's the deal I live off grid. I noticed two things, If my printer is not plugged in when I am on my inverter/battery bank (705 amph with 1000w inverter) and I plug it in it will cause my computer (same circuit) and phone/modem to reset but this does not happen when I am on my generator...
Well seems as though some issue still exists got online this morning and same slow speed, unplugged my line and the one other line from the inverter (left this one unplugged) cycled off the inverter and plugged my house line back in cycled on the inverter came inside and speed is up my not fully...
Thank you all for commenting I have solved the issue. Thru due process of back tracking "what has changed" I unraveled the network extender antenna all jumbled up around my modem power and other peripherals in and around my desk, no luck. I installed a splitter/filter at the DSL connection with...
To use it or not to use it that is the question? I personally advocate for the material and use it avidly especially in marine situations, although today I was reminded of something I recall from engineering school. Always apply on top not connection to connection, hmmm so I thought to sound off...
So here's my latest anomaly I've noticed my internet speed (high speed broadband dsl) being very slow and not letting pages load. It worked normal for the first three months since off grid living started. I've contacted my service provider and they have trouble shooted a few things made some...
Howdy all and what a great resource I've stumbled upon here thank you in advance. So, I am living off grid and have wondered for some time that since I have my t105 6volts wired in series parallel and putout 705 amp hours and recharge with 50 amp charger well then why couldn't I take my 3500w...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
