Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
schematic srd s band frequency multiplier
IM HAPPY TO SAY THAT THIS PROJECT IS AWARDED BY ERICSSON CORPORATIONS AT THE "ERICSSON AWARDS OF EXCELLENCE".
THANK YOU FOR YOUR CONTRIBUTION.
Θ.Β.
an918
As i studied the results i saw that when the power was going over 16 dBm(max output power of the generator) the output had a tension to arise more harmonic frequencies and the Fourier spectrum was becoming more clear. i used a 10 dBm amplifier and the results were much beter now at 25 dBm.
hp comb generator
Some of the results of my frequency multiplier based on the old HP App notes.
The perspective of an expert on this results and how they are translated is needed.
The electromagnetic spectrum is seperated into three major categories.
ELF: Extra Low Frequency <3 Khz
Non-Ionizing: Radiowave frequency 3Khz->30.000Ghz
Ionizing:X-rays, γ-rays >30Thz
At the range of ELF the electromagnetic field is seperated into 2 distinct fields, electric and magnetic. We...
I'm studying the biological effects of electromagnetic fields on living organismsand i would be grateful if anyone has relevant information to share(especially at ELF)
Where can i find papers of Dimbylow P.J. who has studied this subject thoroughly.
Also need this papers:
'Modeling fields...
srd multiplier circuit
Try this one
It optimizes the non-linearity of the srd diode, thus presenting a more accurate model of simulation.
...The e-book sorry but i couldnt find
Re: A question about Step Recovery Diodes (SRD), plz help me
You should try this company's:
h**p://www.advancedsemiconductor.com/diodes/step_recovery.shtml
h**p://www.micrometrics.com
h**p://www.macom.com
h**p://www.metelics.com/srd_surf.htm
But i don't think that they will work at such...
Re: CAD programs for frequency multiplier designs
i have developed my friend an srd frequency multiplier based on some old HP pappers. the result was rich in harmonics but not at the frequency that i had originally calculated(5 GHz). It is somewhere at 2.5 GHz. and the signals is pure(at -20...
Re: CAD programs for frequency multiplier designs
You're really helpfull man.
But if i want to put a pulse wave signal into the circuit can i connect the generator after the input source port? Becaue i can't just change the port with the generator..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
