Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I am actually try to use Laser ranger finder to estimate the distance to the fire source, by the word "neutralise". i actually referring absorption laser frequency, when that happen the laser will always see a spread of spectrum not really it transmitted beam. i believe most laser range finders...
I am currently having challenge on how to use laser range finder to measure distance to fire source. my worries is, the fire source may neutralise the laser spectrum thereby making the receiver see no reflection.
is there anyway this can be done?
Please i need your help.
Thanks alot.
i can give you detail about the display in attachment. however the board is product of EVTECH i could read 2CH00929A at the back of the display,
the features are: 74HCT595 are arranged 4x4 column and rows, all pin 13 are grounded, all pin 12 are connected together, all pin 11 are...
thank man for your reply
but i am having a big challenge
i got a car camry 98 model XLE the car did not come with company keyless entry remote and the car alarm is causing discomfort, how can i tress the wiring to disable it any help is well come.
the alarm is a black box labeled 897300601 and...
help me develop assembly code that will received ascii charater from PC and save them temperaly in internal RAM then write messages on 5x7 leds, scrolling left to right, right to left up and down.
the components intending to used are 74LS138, and AT89S52. with PNP transistors.
i have been having problem using Assembly language to program my AT89Sxx series of uC.
would any one assist me with keil C compiler and the tutorials?
deavong@yahoo.com
i will be glad
Would any one help explain each step of this initialization?
temp11 DATA 0Ah
temp17 DATA 0Bh
;*************************************
buffer DATA 10H
lenght EQU 30
mask_0 DATA buffer+lenght
mask_1 DATA mask_0+1
mask_2 DATA mask_1+1
mask_3 DATA mask_2+1
mask_4 DATA mask_3+1...
Assemly code Please
The second circuit i have is 5x7 Matrix, take a look at the connection and see how you may help. my target now is to get used to writting on LED displays. Thank if can provide me with the assembly codes, containing the ascii table and different effect of scrolling.
i need help
i Will be glad if any one will help me with the Assembly code for this schematic, different effect like srcolling left to right, right to left, up -down down -up e.t.c
also how can i write on 5x7 or 8x8 led matrix
I need help.
i need to write closed in a LED 5x7 matrix when P3.7 is high and Closed when P3.7 is low. my connection is Unl2003 form my row driver common cathode. 745HC95 form my column drivers. four in number, 6 xter.
the hardware is ready but the Assembly code im having difficulty espectialy...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.