Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi
i cant seem to find where to download the 802.15.4g standard from IEEE
(not free!) i want link with money payment.
cant find it in ieee site.
10x
bmwman
m s function
hi,
1. i am looking for sites that contain examples on M-S FUNCTION level2 writing code,
i already checked ("the math works")
2. what should i do with the error in simulink m-s function
"cannot convert matlab array to simulink data"
when i run the m- s function
10x for...
Re: PHASE ESTIMATION
Hi
thanks for the answer,
it is my project - implementing phase recovery .
i want to rotate the entire constellation ,
as you can see in the link above:
**broken link removed**
i want to implement it in matlab for m-ary and also in fpga...
where can i find the...
phase estimation matlab
hello
i need some material and help on PHASE ESTIMATION
(if i want to change the phase of the entire constellation MPSK)
i know few methods to do so , M-POWER method
and V&V algorithem
does someone can help ?
10x
engeening
hi
please, i am looking for the following ebook urgently
1. Rao, N.N., "Elements of Engineering Electromagnetics", Prentice-Hall, 5th Ed., 2000.
10x !
correlators
hello,
i have rf unit connected to DIGITAL MCU.
the rf tranceiver gives RX_DATA after fsk demodulation,
i need to implement a correlator in the mcu.
what does it mean to impelement a correlator ?
and what is a peak correlation ?
(i know what is cross/auto correlation)
i think i...
Re: What is the function of Lithium battery internal circuit
you probably ment to li ion polymer and not li ion.
the chips there are a combinations of what was mentioned before
but also there is a polyswitch and thermistor combination i think.
Re: bandgap
in semi conductor material ,
an electron can not be found in the band gap
there are also conduct band and valence band.
the bandgap is between them .
Added after 17 seconds:
in semi conductor material ,
an electron can not be found in the band gap
there are also conduct band...
Re: ignition detection
hi
just take that wire from the car (there is a ignition wire)
and connect it to a MCU input.
(ofcourse you will need a protection circuit for the input and the mcu)
also use TVS diode.
good luck.
hi
i have battery ,(doesn't matter what kind) , that its capacity is 1100maH
i want to to discharge it to 75% from its capacity , using a LOAD of 200mA
i calculated it , i just don't know if i am right.
1.1AH / 0.2A = 5.5H
5.5H * 0.25 = 1.375 hours.
thanks.
devil_one.
Re: Lectures Notes
hi
maybe you are new to electronic, maybe not
but you should know that electronics is a very rapidly changed area
that means you will have to study all the time and alot.
i would start by search all the terms you mentioned in google ,
and in EDABOARD Search engine .
and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
