Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
power separate design
Hello guy:
Do you know how to design diffence Attenuators level for power separate?
one path Attenuator level is 6dB,
one path Attenuator level is 10dB,
BR,:D
Hello guy:
I can't use PI-attenuator circuit in this design.
Maybe can't design diffence Attenuators level...
8051 ice
Hi guy:
How to generator the hex file to 8051 chipset for keil mon-51 ICE simulator(winbond W78E516B)?
1.need add eeprom in circuit for simulator hex file?
I need find out this fail issue.
Thanks!!:D
cdma desense measurement
:cry:
We use QUALCOMM MSM6025 to design cdma Phone.
I have a big problem for RADIATE SENSITIVITY only
-97 dBm in all channel(desense).
How to improve this problem ?
I try remove rf tx/rx chip but radiate sensitivity is -97dBm.
:?:
cdma desense measurement
:cry:
We use QUALCOMM MSM6025 to design cdma Phone.
I have a big problem for RADIATE SENSITIVITY only
-97 dBm in all channel(desense).
How to improve this problem ?
I try remove rf tx/rx chip but radiate sensitivity is -97dBm.
:?:
Dear guy :
I use cdma chip is Qualcomm MSM6025 .
Do you have any recommend for RX sensitivity problem ?
I can't reduce 1.228MHz multiple power level.:cry:
Thanks your help !!
I have a cdma design question in air measurement.
AIR RX sensitivity == -96 dB request need above -104 dB.
I've found some noise frequency in rx band(-70 dBm)
Noise frequency is spread rate 1.228MHz's multiple .
How to reduce this noise power ? :cry:
help me !! thanks you help .
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.