Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
please help me with my problem with protues
to make short ... the bus wire seems not working with me
i don't know if my way of connecting is wrong or not.
I'm connecting it to 8 leds for testing and output from the motorola MCU (0xFF)
but no led is lighting up
schematic is attached , how can I...
Dontronics Microvga ?
Hi,
I am wondering if someone had tried running the dontronics Microvga (TTL to VGA ) with a microcontroller as host for it (PIC for example or any kind of mcu's)
https://www.dontronics.com/micro-vga.html
so we can share info how to run it correctly , because I have...
picdem.net as a client ?
hi
have anyone worked on picdem.net as a client ?
a connection must be established between a server (written in java ) and picdem.net
I used to have problems using TCP so I switched to UDP. Now the client can send data to the server and it successfuly recieved but...
I want the cufoff of the LPF to be 5kHz ...
my question is how can I choose the Rs and Cs?
I have calculated the w which is 1/(2*pi* 5k) but the result is very small
can someone explain to me , how can I come up with the resistors and capacitors values ?
thanks
very simple question
at apollo displays : https://www.apollodisplays.com/
(at the right side = 15'' all-in-one displays
my question , can microcontrollers (PICs or any other kind) run these kinds of lcds?
Or the same lcds monitors that are used along with computers ??
any help?
HI
I'm new to PIC programming.
Using the PICSTART I have, I hooked up the PIC , first I just want to check if it make difference in the direction of placing the PIC ? if so, in which direction I should put it? I assumed that I should make pin No. 1 upward not downward , is that correct...
hi ..
I want to test a serial interface ... and to make things easy
I assumed that the two devices are PICs ( I know that we don't need a serial connector to connect them , but the aim here is just to test the serial connection whatever the devices are )
I was confused with the connection ...
yes , but what about the max232 to serial port pinout ?
pin 2 must be connecected to pin 3 to establish the DTE-DTE connection (for example )
but what about the max232 ? which pins are connected to it ?
max232 interfacing proteus model
hi,
I would like to test a microcontroller serial connection in a software like ISIS Protues
I just have small question about how to connect two microcontrollers using serial port
I imagined that the design will be like this :
mcu <--> max232 <--> db9(f)...
proteus tutorial
hi
First of all, I want to say that I tried my best to search in searchengines and here in the forum
but it didn't help ! : (
I would like to have an A-Z tutorial for ISIS Proteus ,
the HELP files are very bad for explanation and I get lost in simulation part
I drawed my...
mplib.exe
hi
I an new to MPLAP, I just wanted to test the sample project that comes along with the tutorial , and I found an error !! ( so quickly !! )
when buliding the project this error appears to me ....
I don't know where to find the MPLIB.exe [a jpg file is attacted ]
and how can I...
hi
just a very small and quick question ...
if I want to connect one PIC to another
considering that one of them will give commands to the other to start a certain job
how can this be done ?
I mean , do the first one (explained above ) will act as the other one is an IO ??
I would be...
hd61202 pic
huozee
I mean that the T6963 will be connected directly to PIC and that will be PIC 16F877
give me a minute to explain the idea :)
the PICF877 will act as the (head) controller that
controllers different devices through thier controllers
so the PICf877 will controller that...
graphic lcd character
matelda
thanks ^_^
bbarney
how can I thank you ???
this is really what I was looking for..
thanks a lot
misha82
Thanks . Fo now , i have no problem in interfacing the lcd to the controller ...
using T6963 looks easy
but I wonder how can i interface this T6963 to a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.