Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: Air Fuel ratio sensor LSU 4.9 sensor interfacing ( oxygen sensor )
Hello Dick_dick_freebird thanks for the detailed reply i am just interested in is if i control the temperature by some means then i just want to measure the oxygen content in the exhaust gases. i dnt remember exactly as what...
Air Fuel ratio sensor LSU 4.9 sensor interfacing ( oxygen sensor )
air fuel ratio sensor used in cars, model LSU 4.9 boash , controller Chip CJ125 , i have searched alot, lots of info is also available but till now i am not able to understand its basic working principle of this sensor, because...
Hello Dear Members, i have to make pcb package of PVQFN package, i have the mechanical data of the footprint but there are 2 reading for each measurement i need to know which one is correct ? kindly guide me thanks.
Hello i have made a double side pcb, but the VIAS comes under the SMD IC which has Ground plane so when i solder the IC VIAS becomes short with the IC, is there any way i can paste resist layer on these VIAS in ARES Porteus ? i need it urgently, and also is there any way to make this board work...
Hello group members. i need your kind suggestion. i have to measure the weight of a contain full of liquid continuously, and when the liquid level is lowers then the preset limit it will turn on the alarm.
Condition is i cannot touch the liquid.
Now two options.
1) weigh sensor
2) infrared...
Hello Members
i need your help. i need some 3 phase VFD controller IC, is there any such IC is available in the market ? i don't want to program. i just need dedicated controller which can produce the signals for the gate of the mosfets. Kindly guide if such dedicated IC is available. Thanks.
you need word on the gate drive circuit i think if you gate is not driven accurately then this problem can happen.use totem pole transistor configuration to drive the gate and then post the results.
or try to use N-Channel mosfet like IRF740 always most your real schematic to get better results...
you can use simple boost converter if your load is resistive then making a boost converter is really easy or you can find some dedicated IC like LM2596(this is actually buck) which can boost the voltage to the desired level.
Yes you once the hex is created you can use any suitable program to load hex to PIC i suggest you to use PICKIT2 because it really simple and error free.
hi everyone how are you people.. i want to ask , i have this ferrite core. with material PC40 and size EE55 how can i know about its Bmax to use in calculating its turns as shown in Tahmid blog. and also its area A...
i use MikroC for Pic compiler and its Graphical Librarey, the problem is that i call all functions onles time but its output comes 2 times , this is tha code
void main()
{
Glcd_Init();
Glcd_Fill(0xFF);
Glcd_Circle_Fill(90, 30, 10, 0);
Glcd_Dot(90, 30, 2);
Glcd_H_Line(0,127, 40, 0)...
hello how are you all respected sir :)
i am new to orcad i install it and add all libraries and when i use part from these libraries and after creating simulation profile error comes that pspise template is not available for some parts.. but these parts are there in library even then it say the...
sir i have read in application note of some company in which they place capacitor at input which value depend on the input capacitance of IGBT.. my IGBT has input capacitance of 2800pf thats why i place 28pf capcitor which is 10% of input capacitance .. they write there this capcitor is to avoid...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.