Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
This article will share the OK3568-C EVK unboxing experience and basic function evaluation.
First, let's do some preparation work:
• 12V2A or 12V3A DC power cable
• Type-C serial debugging cable (CP2102 serial driver needs to be installed on the computer side)
• HDMI cable and external screen...
Forlinx Embedded OK3588-C EVK is a powerful flagship product. It adopts the split design of the SoM+carrier board and is based on the Rockchip RK3588 processor. This processor has ultra-high performance, including 4-core Cortex-A55 and 4-core Cortex-A76 architecture. The Cortex-A55 has a...
FET3399-C is a system-on-module (SoM) based on the Rockchip RK3399 processor. It features two Cortex-A72 cores with a clock speed of up to 1.8GHz and four Cortex-A53 cores with a clock speed of up to 1.4GHz. The module integrates a Mali-T864 GPU, supporting OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1...
What is CAN-FD?
With the advantages of real-time, anti-interference, and safety, CAN2.0 has been widely used in the industrial and automotive industries. However, its maximum rate is only 1 Mbit/s. , and each frame can only transmit 8 bytes of valid data at most. In addition, only about 50% of...
What is CAN-FD?
With the advantages of real-time, anti-interference, and safety, CAN2.0 has been widely used in the industrial and automotive industries. However, its maximum rate is only 1 Mbit/s. , and each frame can only transmit 8 bytes of valid data at most. In addition, only about 50% of...
Introducing the FET3568-C System on Module - an advanced and robust solution for a variety of applications. Powered by Rockchip's new generation AIoT processor RK3568, this 64-bit quad-core Cortex-A55 SoC is equipped with NPU on board and can run at speeds up to 2.0GHz, while maintaining low...
It is a video distribution system implemented by the Tornado framework. The system reads video stream data in real-time by connecting to a USB camera and sends the data to clients for display via WebSocket protocol.
Main steps for implementation are as follows:
1. Check the interface occupied...
Nowadays, face recognition technology is becoming more and more mature and widely used. Face detection implementation is an important part of face recognition technology. This article will introduce how to add the OpenCV face detection model on the basis of video surveillance on the OK3588-C Arm...
Network configuration is a very important step in Embedded System. If you are going to use the Forlinx RK3588 ARM Development Board, first you need to configure the NIC correctly to enable a normal network connection. So, this article will introduce how to modify the configuration of eth0 to...
FET3588-C System on Module (SoM) carries Rockchip’s advanced hybrid processor RK3588 contains quad-core Cortex-A76 and Cortex-A55 cores, A76 core runs up to 2.4GHz, and A55 core clock up to 1.8GHz. It has a super advanced engine can support up to 8K output, quad-screen with different content...
RKNN (Rockchip Neural Network) is a deep learning inference framework for embedded devices. It provides an end-to-end solution for transforming trained deep-learning models into executable files that run on embedded devices. The RKNN framework can efficiently run deep learning models on embedded...
The T507 system on module(SoM) CPU is a quad-core Cortex-A53, 1.5GHz main frequency, the GPU is G31 MP2, and the core board integrates 2GB DDR3 RAM, 8GB eMMC ROM for smooth operation of Android, Ubuntu, Linux operating systems. High performance, more than 50% performance improvement compared to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
