Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ZYBO development board with USB drive

Status
Not open for further replies.

joniengr

Advanced Member level 1
Joined
Nov 3, 2018
Messages
440
Helped
1
Reputation
2
Reaction score
1
Trophy points
18
Activity points
3,877
Hi,

The ZYBO Z7 020 development board has a USB connector at witch we can attach a USB drive for data storage. Do we need to configure the ZYNQ as host or device ? I guess the USB OTG can be configured both as host and also as device. If the ZYNQ has to write data to the USB drive then the ZYNQ configuration has to be as a host, right ?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top