Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Zeland IE3D simulation HELP!

Status
Not open for further replies.

bluesky19

Newbie level 6
Joined
Dec 18, 2006
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
Hi,

I'm beginner in this. I'm facing some problem about the IE3D simulation. I'm using IE3D to simulate my patch antenna but i'm not sure about the feeding because my antenna is feed from side. Besides that, i cannot select the simulate icon when i want to do simulation for my design.

Thanks very much for the help.

Best regards.
 

jian

Advanced Member level 3
Joined
Sep 8, 2003
Messages
868
Helped
176
Reputation
352
Reaction score
22
Trophy points
1,298
Activity points
9,433
Hi, Bluesky19:

I checked your file. The feed is not correct. Other things are good. You should use h-localized port. Please create the horizontal feed line and touching the vertical ground. Make sure you have connection edge there. Please leave some small rectangle between the vertical ground and the feed line to define a h-localized port.

The return loss of the antenna is good. Attached are the revised file and results.

best regards,
 

    bluesky19

    points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top