Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
To desigh the patch antenna You can use 2.5D simulator (MWO, Sonnet), or CST-MWS if Your structure has many layers. To Yagi-Uda ... usually the formulas from Balanis book gives the good result, but if You want to simulate it, try to use SuperNEC or CST-MWS.
Since MWO or Sonnet uses a close box for simulation (In sonnet only one wall canbe removed to obtain radiation pattern) they should not be used to simulate a patch antenn. Do it with free of cost using ensemble student version. Otherwise IE3D is a good and $ wasteing option.
Also for a Yagi CST should not be tryed. It will take very long time to optimize a yagi(Actually Uda was the inventor, poor man). SuperNEC is a good choice but many other NECs are available for free of cost.
:!: :idea: :?:
Kit-the-great said:
To desigh the patch antenna You can use 2.5D simulator (MWO, Sonnet), or CST-MWS if Your structure has many layers. To Yagi-Uda ... usually the formulas from Balanis book gives the good result, but if You want to simulate it, try to use SuperNEC or CST-MWS.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
