Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Xilinx Zynq + Booting Core 1 from SD-Card with fsbl

Status
Not open for further replies.
F

flote21

Advanced Member level 1
Joined
Jan 22, 2014
Messages
411
Helped
1
Reputation
2
Reaction score
3
Trophy points
1,298
Activity points
5,595
Hello Guys,

I am wondering about how to boot only the Core 1 from the SD-Card thanks to the fsbl. I have the Zc702 evaluation board on my table and I tried the next FSBL bootings with the success results:

- Only Core 0 ==> Ok
- Core 0 + Core 1 ==> Ok
- Only Core 1 ==> No Ok.

Could it be that the SoC Zynq needs to boot firstly the core 0 and then the Core 1? Is it not possible to boot the Core 1 from the SD-Card with the FSBL and leave the core 0 with nothing?

Thanks in advance!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top