xie.qiang
Junior Member level 1
hi, when I run post simulation on Modelsim, it report the erro infor about this, can you guys help me?
# ** Error: C:/Modeltech_6.3d/xilinx_libs/simprims_ver/simprims_ver_source.v(17175): $recovery( negedge RST:994435 ps, posedge CLK &&& (rst_clk_enable1 == 1):995219 ps, 798 ps );
# Time: 995219 ps Iteration: 2 Instance: /tb_dds_32x16_top/u_dds_32x16_top/\u_sys_rst_gen/mst_rst_r0
And attachment is the wrong wave as well as the wrong code reported by modelsim.
Thanks.
# ** Error: C:/Modeltech_6.3d/xilinx_libs/simprims_ver/simprims_ver_source.v(17175): $recovery( negedge RST:994435 ps, posedge CLK &&& (rst_clk_enable1 == 1):995219 ps, 798 ps );
# Time: 995219 ps Iteration: 2 Instance: /tb_dds_32x16_top/u_dds_32x16_top/\u_sys_rst_gen/mst_rst_r0
And attachment is the wrong wave as well as the wrong code reported by modelsim.
Thanks.