Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Xilinx EDK 3.2 and ISE 6.1

Status
Not open for further replies.

apollo

Junior Member level 3
Joined
Sep 26, 2001
Messages
28
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
173
edk 11 registration id

Hi,

Did anyone get EDK 3.2 working with ISE 6.1
If so, any advice?

Thanks.
 

I was told that EDK 3.3 (or 3.4) was coming out at the end of the month. It is suppose to work with 6.1

robotman
 

Hi,
this is the info I found on the X.|.nx website:

EDK Version Compatibility Matrix
6.1i EDK Requires 6.1i ISE plus ISE SP1 or greater
3.2.2 EDK Requires 5.2i ISE plus ISE SP1 or greater
3.2.1 EDK Requires 5.2i ISE plus ISE SP1 or greater
3.2 EDK Requires 5.2i ISE plus ISE SP1 or greater
3.1.3 EDK Requires 5.1i ISE plus ISE SP3
3.1.2 EDK Requires 5.1i ISE plus ISE SP2, plus a patch
3.1.1 EDK Requires 5.1i ISE plus ISE SP1
3.1 EDK Requires 5.1i ISE plus ISE SP1

Has anybody already EDK6.1i to share?
Thanks,
Maddin
 

I have EDK6.1, but i do not know how can i share with you! Maybe you can open a ftp.
 

Hi zcq,

Pls, check your PM.

...hope the force is with us... :)
 

zcq said:
I have EDK6.1, but i do not know how can i share with you! Maybe you can open a ftp.

zcq, are you member of bone's hub??
bye,
Maddin
 

Sorry for my careless, my roommate told me that he had the latest version of Xilinx's embeded processor development tools, but it's edk3.2. And i thought it should be 6.1. VERY VERY SORRY FOR MY CARELESS, especiall for those who PM me!!!
 

Who have ISE 6.1i register ID license ?
Please PM to me..............Thanks!
 

Hello zcq,
Can you share or PM me xilinx EDK 6.1i Registration ID?

Thanks.
 

Who have EDK 6.1i register ID license ?
Please Share or PM me..............Thanks!
 

you can use edk 3.2 with ise 6.1 by when using xilinx enviroment 5.2 when using edk 3.2 then switch back to ise 6.1 for place and route. 61. is much better and faster if you use xst synthesis tool
 

I'm also interested in ise6.1 register ID please PM me
 

I'm also interested in EDK6.1i register ID please PM me
 

I got the edk registarr ID. the problem is ISE6.1 register ID.
EDK only comes with evalution license for ISE6.1. Can you help me with that?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top