Operation with Supply Voltages Other than ±5V
Using supply voltages less than ±5V reduces the analog
signal range. The MAX398/MAX399 muxes operate with
±3V to ±8V bipolar supplies or with a +3V to +15V single
supply. Connect V- to GND when operating with a single
supply. Both device types can also operate with unbalanced
supplies, such as +10V and -5V. The Typical
Operating Characteristics graphs show typical on-resistance
with ±3V, ±5V, +3V, and +5V supplies. (Switching
times increase by a factor of two or more for operation at
+5V.)