Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Worked examples for Fully controlled single phase

Status
Not open for further replies.

jonnybgood

Full Member level 4
Full Member level 4
Joined
Dec 28, 2010
Messages
214
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Visit site
Activity points
3,011
I need to study for a test and one of the criteria will be similar to this rectifier;

1ph_fully_cont.jpg

Given: RMS Voltage, L, R and back EMF, alpha with continous load current.

To determine;
-Output voltage and current.
-Second and fourth harmonics and Output RMS current.
-Power delivered to the Load.

I am using these formulae;
Screen Shot 2013-11-24 at 16.44.33.png

Please confirm that I am using the correct formulas.. thanks

I appreciate if you can point me to a good source or book that works a similar example.
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top