Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Wiring between two bad connection points - Problem

Status
Not open for further replies.
C

cdwrite

Newbie level 6
Joined
Mar 16, 2003
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
98
Wiring Problem

Hello,
Wondering if anyone know how to Wire between two bad connection Points in a PCB due to an over heating Soldering Without Using Wires

Thanks
 

conductors

You will have to use some form of conductor. There is a silver ink that is conductive. Another option is copper foil that can be cut and is sticky on one side.
 

You can get a free sample of the silver ink conductor from Emerson! they all all sorts of repair products conductive and nonconductive!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top