Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

WIPL-D Benchmark - 20 dB Horn Antenna

Status
Not open for further replies.

goxy

Full Member level 4
Joined
Jul 25, 2002
Messages
234
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,298
Activity points
2,282
wipl-d

20 dB Horn Antenna
Monopole Antenna over Square Plate
UHF Panel Antenna
Microstrip Bend
Dielectric Rod Antenna
Hemispherical Dielectric Antenna
Microstrip Patch Antenna
Welder Machine

Results come on:

20db Horna on 10Ghz
Quarter model and symmetry improve freq.simulation 78 times and pattern simulation 2 times.
Only 19 ses per frequency and 0.0042 sec. per pattern.

Dielectric Rod Antenna

Quarter model improve perfomance 33 times.

Hemispherical Dielectric Antenna
At 1.8Ghz half model improve perfomance 3 times.

Microstrip Patch Antenna
Half PEC model improve perfomance 29 times.


Welder Machine

**********************

I never seen fastest EM simulator.
Anybody work with full version?
 

olzanin

Member level 1
Joined
Sep 1, 2003
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
272
wipl-d drasko

I´m working with full version!
It is very good and fast for all structures: Antennas, SAW Filters and also boards with concentrated loadings.
 

drasko

Member level 2
Joined
Mar 9, 2004
Messages
45
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,286
Activity points
286
Re: WIPL-D Benchmark

Now, the code is even faster, up to 20 or 30 times.
Read everything about it on the www.wipl-d.com .
Regards,
drasko
 

tmau

Newbie level 5
Joined
Aug 31, 2004
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Hong Kong
Activity points
70
WIPL-D Benchmark

Most fastest CAD for metal antenna while I am using it in a few years ago. But it becomes inefficiency while with dielectric bodies.

For the GUI, I think WIPL-D doesn't have any improvement. Export & Import features for industrical fabrication?

Also, I don't know the mesh engineer in the lastest version. Can it mesh the whole body automatically near the feed?

Can it handle the microstrip printed elements for dxf file?


Depends on what kind of applications for your development, academic guys will use that software for their research
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top