Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Winding Configuration for Lower Leakage

Status
Not open for further replies.

sabu31

Full Member level 5
Joined
Jan 28, 2011
Messages
288
Helped
12
Reputation
24
Reaction score
12
Trophy points
1,298
Activity points
3,862
Dear All,

Among the attached winding configuration on a Limb of the transformer as shown in the attached file. Which configuration has the lowest leakage? The one in which the primary is spread over the limb or concentrated at the centre of transformer limb. The secondary has higher turns and completely occupies the limb of the transformer.

Thanks
 

Attachments

  • Transformer_Configurations.png
    Transformer_Configurations.png
    12.4 KB · Views: 25

sabu31

Full Member level 5
Joined
Jan 28, 2011
Messages
288
Helped
12
Reputation
24
Reaction score
12
Trophy points
1,298
Activity points
3,862
Thanks FvM for the reply. Will it be possible to share the simulation file and any tutorial related to it. I have downloaded the student version of quick field, but have no experience in FEA. The simulation can be a starting point.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top