Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why working with op-amps is so popular ?

Status
Not open for further replies.

u04f061

Advanced Member level 4
Joined
Mar 3, 2006
Messages
103
Helped
7
Reputation
14
Reaction score
6
Trophy points
1,298
Activity points
2,085
working with op-amps

op-amps are analogue devices.modern world is known to be digitally oriented.
still op amps are very famous.does this mean that there is a need for analogue circuitry for modern world.
 

Re: working with op-amps

See You can't differentiate a design As purely anlaog or purely digital. Any successful design consists of both these components. Analog and digital design are like faces of a coin.
 

Re: working with op-amps

Remeber that the real world is analog -- so when you have to interact with real, physical things you have to have at least some analog. Look at sensor and signal conditioning electronics -- they have to have some analog before then enter into the A/D converter. Power conversion is analog -- it might be controlled by some digital circuits -- but the main power section is made up of FETs and diodes with inductors and capacitors for filtering
 

working with op-amps

Realworld is analog ....so ceratinly we need op-amp

Added after 5 minutes:

op-amp is mainpillar for analog computation
 

Re: working with op-amps

for ur knowledge at very deep submicron tech things are again changing to analog.

so analog can never die!
 

Re: working with op-amps

u04f061 said:
op-amps are analogue devices.modern world is known to be digitally oriented.
still op amps are very famous.does this mean that there is a need for analogue circuitry for modern world.

yes, opamp will for surely rule for a long long time, so far there is no its subsititute for it. also research and development ofr opamp never stop. so studying for opamp will be surely rewarding
 

Re: working with op-amps

op amp have replaced discrete amplifiers. but still they are appearing in literature an hardly used.what this means
 

Re: working with op-amps

hi dear,
i think that no body refuses the importance of op- amp. it smean taht a good circuit contains both the electrical as well as electronics components and it also depend on the requrement.
 

Re: working with op-amps

Especially in analog, OPamp does most of jobs..
Think about a feedback circuit!
 

working with op-amps

analog is still important today
 

working with op-amps

"THE WORLD IS ANALOGIC" is a so so answer, because the Modern Phisics demostrated that the nature is discrete, but in general the world is considerated analogic, for this reason, the analogic circuitery don´t disappear.
 

Re: working with op-amps

To certain extend, designing analog circuits is more difficult than designing digital ones. That's the reason why a analog designer is always more paid than a digital one.

Will
 

Re: working with op-amps

Willt said:
To certain extend, designing analog circuits is more difficult than designing digital ones. That's the reason why a analog designer is always more paid than a digital one.
you got that right

Will
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top