Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why we are getting cross talk when we are going into deep submicron technology?

Status
Not open for further replies.

mujju433

Full Member level 3
Full Member level 3
Joined
Jun 2, 2007
Messages
174
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
2,293
why we are getting cross talk when we are going into deep submicron technology ?
 

cross talk

as the technology shrinks i,e below 0.45nm, crosstalk problem is a issue due to the formation of coupling capacitances betn adjacent wires. Coupling capacitance are formed between two adjacent wires. these coupling capacitance adds to the interference of signals on those two adjacent wires which ultimately leads to cross talk.
 

Re: cross talk

for deep submicron connections are fit closer together resulting in formation of virtual capacitance
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top