Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why the simulation is slow on my notebook?(2-3GB of data)

Status
Not open for further replies.
Why simulation is slow

Your memory is small. the big design must use swap(HD as Mem). So the HD light is flashing. you can add a big mem up to 2G.
 

Why simulation is slow

incr memory, use linux below 8 edition
 

Re: Why simulation is slow

lovelytwq said:
incr memory, use linux below 8 edition
Click to expand...

It's only ver. 2.6 now. What do you mean below 8?
 

Re: Why simulation is slow

xworld2008 said:
you can use hdpara -tT /dev/hda1 to see the harddisk speed. if it not reach more than 54M, you should open the DMA of harddisk, in my computer
it reach to 120M(8M cache ,7200).
Click to expand...
The commad is: hdparm -tT /dev/hda1
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top