Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why the separation is twice times of the trace width?

Status
Not open for further replies.
tony_lth

tony_lth

Advanced Member level 5
Joined
Jul 28, 2010
Messages
2,086
Helped
377
Reputation
756
Reaction score
368
Trophy points
1,363
Location
Beijing
Activity points
12,622
For difference offset Coplanar strips,
If the trace width W1 is 60um.
Option1: S1=120um, D1=120um, then get Zdiff=90.99 ohms.
Option2: S1=300um, D1=300um, then get Zdiff=98.93 ohms.
Someone said that S1 and D1 should better be twice times of W1. So he denied option2.
I think option2 is feasible, who can give comments on that?
 

Attachments

  • Diff_Coplanar.png
    Diff_Coplanar.png
    38 KB · Views: 109

This is used in mobile phone, that is multi-layer board.
I don't think there would be some difference for two options in EMC, EMI, etc.
What's your idea?
Thank you very much.

- - - Updated - - -

This is used in mobile phone, that is multi-layer board.
I don't think there would be some difference for two options in EMC, EMI, etc.
What's your idea?
Thank you very much.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top