Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

why the dracula has no output needed during the LVS input

Status
Not open for further replies.
J

jaylin

Junior Member level 1
Joined
Dec 24, 2005
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,581
Hi Guys,

Why the PDRACULA says : ** NOTE : NO OUTPUT NEEDED SO SETTING SUMMARY-ONLY=YES FOR THIS RUN ONLY

Thanks a lot

Jay

:/g testa.rul
:/f


** NOTE : DEFAULTING CNAMES-CSEN TO "NO" WHEN SYSTEM=GDS2
** NOTE : NO OUTPUT NEEDED SO SETTING SUMMARY-ONLY=YES FOR THIS RUN ONLY

** CREATING : COMMAND FILE : jxrun.com

** NOTE : THIS JOB HAS 26 STAGES


END OF DRACULA COMPILATIONS

* 0.016 Mbytes allocated to the current process.
* 0.016 Mbytes is still in use.
* THE END OF PROGRAM TIME = 14:32:18 DATE =12-JAN-2006 *
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top