Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why is the Cadence so slowly, when to change finger ?

Status
Not open for further replies.

walkingsun

Member level 2
Joined
Jan 10, 2005
Messages
48
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
CN
Activity points
252
The ICFB 5141 is operated on Linux Server( 100M PhY, 4 CPUs, 4G Mem...)

But when the finger of mos is changed from 1 to others bigger than 1, or from ones bigger than 1 to 1, the schematic is much more slower than normal case.

What's wrong with the setting of my server or network?

Plz help me
 

walkingsun said:
The ICFB 5141 is operated on Linux Server( 100M PhY, 4 CPUs, 4G Mem...)

But when the finger of mos is changed from 1 to others bigger than 1, or from ones bigger than 1 to 1, the schematic is much more slower than normal case.

What's wrong with the setting of my server or network?

Plz help me

Anyone could help me?
 

If you are reahat enterprise 3.0,Please change the version.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top