Mar 2, 2009 #1 I ilikebbs Advanced Member level 4 Joined Nov 30, 2002 Messages 104 Helped 3 Reputation 6 Reaction score 1 Trophy points 1,298 Activity points 705 I have seen a circuit. It convert SPDIF signal to differential signal. And it connects the differential signal to a connector via transformer. so I do not know why the circuit is designed like this. does the transformer must be needed? thanks,
I have seen a circuit. It convert SPDIF signal to differential signal. And it connects the differential signal to a connector via transformer. so I do not know why the circuit is designed like this. does the transformer must be needed? thanks,
Mar 5, 2009 #2 Externet Advanced Member level 2 Joined Jan 29, 2004 Messages 586 Helped 28 Reputation 58 Reaction score 30 Trophy points 1,308 Location Mideast US Activity points 5,775 To match impedances of the circuitry to the standard, to isolate grounds to prevent loops; to convert unbalanced/balanced signals. https://www.cirrus.com/en/pubs/appNote/AN134REV5.pdf
To match impedances of the circuitry to the standard, to isolate grounds to prevent loops; to convert unbalanced/balanced signals. https://www.cirrus.com/en/pubs/appNote/AN134REV5.pdf
Mar 6, 2009 #3 flatulent Advanced Member level 6 Joined Jul 19, 2002 Messages 4,624 Helped 489 Reputation 980 Reaction score 151 Trophy points 1,343 Location Middle Earth Activity points 46,689 In some LAN networks on military aircraft, the transformer circuit includes two series resistors. That way an open or short fault in the semiconductors do not bring the network down.
In some LAN networks on military aircraft, the transformer circuit includes two series resistors. That way an open or short fault in the semiconductors do not bring the network down.