Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Which OS to use with strongArm processors?

Status
Not open for further replies.

mrhfw

Junior Member level 1
Joined
Jan 6, 2002
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
57
who used strongArm

Whow used strongArm
Which os used
Where download the OS
Thanks!
 

Take a look at this for more info about OS used wiht ARM processors.

**broken link removed**

Which os you want and for which platform?
 

Look
h**p://sources.redhat.com/ecos/
h**p://w*w.uclinux.org/
 

I want

I want a OS as embed system like linux
 

Re: I want

mrhfw said:
I want a OS as embed system like linux

uClinux is very like linux .....

Also look:
h**p://w*w.linuxdevices.com/
h**p://w*w.embeddedlinux.com/
h**p://w*w.lart.tudelft.nl/
h**p://w*w.lart.tudelft.nl/lartware/port/
 

If I had to choose between Linux and ucLinux, I would use
Linux. ucLinux is intended for CPU's with no MMU and StrongARM has it
built in.

~flaxa
 

Look

ARM Linux base development site - h**p://w*w.arm.linux.org.uk/

This page describes a method for installing ARM Linux on the Intel Assabet (SA-1110 evaluation) board
h**p://w*w-2.cs.cmu.edu/~wearable/software/assabet.html
 

Good starting poit for Intel(R) StrongARM evaluation platforms - Linux Development on the evaluation platforms

h**p://developer.intel.com/design/strong/applnots/sa1100lx/sa1100lx.htm
 

Re: who used strongArm

The LART is a small yet powerful embedded computer capable of running Linux. 220 MHz Digital SA-1100 StrongARM CPU.

**broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top