which is the best programmer for programming microcontroller

[snsriram79]

pic mcu with the galep 4

hi

which is the best programmer for programming microcontrollers. i hav looked into topmax and lv48 serial programmer. can any1 justify which 1 is good.

i am also in search of logic analysers with debugging tool. i heard these logic analysers can read the program in the microcontroller and give it in pc is it so can u suggest sum companies

thanking u
sriram

 

[Sobakava]

Programmer

Try these nice topic :
**broken link removed**

If you need an universal one:
--------------------------------------------------------------------------------

**broken link removed**

Supported devices are :

PicMicro(TM):
• 12C(LC, CE)5xx/6xx, 14Cxxx, 16F(LF)8x/87x
• 16C(LC, LV)5x/50x/55x/6x/6xx/71x/7x/77x/8x/92x, 16CE6xx
• 17C(LC)4x/7xx
• 18C(LC)xxx
• KeeLoq® encoders and decoders: HCS2xx/3xx/4xx,HCS512
Serial EEPROM:
• 24C(LC, AA)xxx, 24C(LC, CS, LCS)xx, 85Cxx, 93C(LC, CS, LCS)Cxx, 25C(LC)xxx
Parallel EEPROM: • 28C(LV)xx

The PicProg® V3 also supports a number of ATMEL Corp. products including:
AVR:
• AT90Sxxxx, ATmegaxxx(L), ATtinyxx(L,V)
MCS51 MCU:
• AT89Cx051, AT89C(LV)5x, AT87F(LV)5x, AT89(L)Sxxxx
Serial EEPROM:
• AT24Cxxx, AT34Cxx, AT93Cxx, AT25(HP)xxx
Parallel EEPROM & Flash:
• AT28C(BV, HC, LV)xxx, AT29Cxxx, AT49(H)Fxxx

Besides, the PicProg® supports the following product families:
SCENIX Semiconductor Inc.
• SXxxxx
Angstrem
• An15Exx
Fairchild Semiconductor
• ACE1xxx(B,L)
INTEL Corp.
• 87C5x(Rx,Fx)
• Parallel Flash memory: 28Fxxx
Philips Semiconductors
• P87C5x(Rx+,Fx)
Parallel CMOS EPROM: 27C(LV)64/.../040 by various manufacturers
Serial & Parallel EEPROM/Flash memory:
• AMD — Am28/29Fxxx
• Macronix — MX28Fxxxx
• Mosel Vitelic — V29(L)C51/31xxx
• NexFlash — NX29Fxxx
• Ramtron — FM24C(L)xx, FM25(C,L,CL)xxx, FM1x(L)xx
• Samsung — KM29N(U, V, W)xxxxx
• SST — SST29EE(LE,VE)xxx, SST39SF(LF,VF)xxx
• ST Micro (SGS-Thomson) — ST(M)24/34/25/93/95xxxx, M28/29(C)Fxxx
• Toshiba — TC58Axxx
• Winbond — W29C(EE)xxx
• Xicor — X25(C)xxx


Here is firmware and schematic and Windows software available
for PicProg3. They say it is also capable of removing code protection
from PIC16C and PIC16F series micros.

I get the schematic but it is a bit cloudy for me. If do you have
better information (schematic, pcb layout etc.) please let me know.

(a friend of mine has this programmer, I'll visit him to take a look
if you don't have useful material)

Regards.

 

[cheolim]

Hello, snsriram79

I think Topmax is best one.
I used it over 8-years. There are no problems and over 6000 devices are
supported.
EEtools always update their program faster than others if you request.

Good luck.
:roll:

 

[Fragrance]

programmer

cheolim

I am using ic-prog it is free ware program with hundred % working its program almost every chip pic mcu , atmel , avr , serial eeprom , spi eeprom, microwire , and lot of other with no mony and working hundred
% you can found it under link
www.ic-prog.com

one thing more it almost support all famous hardware
i can pm you the best hardware which i using with it if you take interest

regards
khalid

 

[senthilkumar]

helllo sriram,


i think topmax is the programmmer

its programmme both intel and motorolo family mc and pic

bye

 

[mbyka]

Al11 -Galep progrmmer schemmatics

**broken link removed**

 

[boyzplus]

Al11 -Galep progrmmer schemmatics

**broken link removed**

hi mbyka,

i couldn't find schematics, in what directory?

rgds
boyzplus

 

[mbyka]

hi you look careful all files

 

[The Puma]

Where are the schematics?

Please help

 

[Rostfrei]

mbyka I wet trough all directories and exe files and there is no "Al11 -Galep progrmmer schemmatics" so in the future please dont spread any more untruth statesments.

If you have shematics share them with others otherwise be quiet!

 

[nex]

Hello, snsriram79

I think Topmax is best one.
I used it over 8-years. There are no problems and over 6000 devices are
supported.
EEtools always update their program faster than others if you request.

Good luck.
:roll:

Hi cheolim,

Perhaps you can help me Did you open the programmer's case? I want to know what IC's are inside especially the pin driver...
That's because I want to build a programmer :

Cheers !

 

[pvinbox@yahoo.com]

Re: programmer

hai

now p16pro is freeware
it can program nearly 100 devices in microchip
and it's hardware is very simple

 

[suromenggolo]

Re: programmer

this is AVR programer site