Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Which Eda tool verify functionality and does the timing analysis of MultiCore design?

Status
Not open for further replies.

vivek_p

Advanced Member level 4
Joined
Feb 16, 2010
Messages
115
Helped
10
Reputation
24
Reaction score
9
Trophy points
1,298
Activity points
2,009
Is there any EDA tool to verify the functionality and do the timing analysis of a multicore design......
 

MultiCore design

Have you tried with VCS for functionality checking and Prime Time for timing analysis. These are Synopsys tools.

With regards,
JayNarayan
 

Re: MultiCore design

yes I have used Synopsys Dc................but I actually meant is there any tool exclusively for "multicore" designs......................
 

Re: MultiCore design

Multicore design is also digital design. DC/PT are all just tools. So need you implement for Multicore.
 

MultiCore design

There is no tool specific for a design, all backend tool, only read RTL code, they don't care what are there!
So it is only you methodology can handle, multicore design...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top